Posters
Title | Presented at | Year | Keywords |
---|---|---|---|
Surface figure and force measurement in ductile machining of calcium fluoride | American Society for Precision Engineering | 2004 | diamond turning, ductile surface, MDRL |
Comparison of force and acoustic emission sensors for monitoring precision grinding | American Society for Precision Engineering | 2004 | acoustic emission, force feedback, metrology, ultraprecision grinding, MDRL |
Analysis of a parallel-axis flatness measuring instrument | European Society for Precision Engineering and Nanotechnology | 2006 | flatness inspection, homogeneous transformation matrix model, HTM, MDRL |
Control of low-infeed grinding using force and diameter measurement | American Society for Precision Engineering | 2007 | plunge grinding, grinding, force, MDRL |
A comparison of reversal and multiprobe error separation | European Society for Precision Engineering and Nanotechnology | 2008 | multiprobe, reversal, error motion, MDRL |
Design and testing of a step-compensated bi-conic hydrostatic spindle | American Society for Precision Engineering | 2009 | Hydrostatic, biconic, step compensation |
Balancing air bearing spindles for servo track writers | American Society for Precision Engineering | 2011 | balance, air bearing, servo track |
Design, manufacture, and testing of nanometer-level spindle metrology testballs | American Society for Precision Engineering | 2011 | spindle, metrology, testballs, nanometer |
Surface texture detection with in-process measurement | American Society for Precision Engineering | 2011 | surface texture, in process, measurement |
Looking in vs. looking out at error motion and eccentricity | American Society for Precision Engineering | 2011 | error motion, eccentricity, fixed, rotating sensitive, direction |
Microfinishing precision-ground surfaces using flatstones | American Society for Precision Engineering | 2011 | flatstone, flatstones, microfinishing, precision |
Bearing misalignment causes oval errors, size variations | American Society for Precision Engineering | 2011 | misalignment, undulations per revolution, upr, out of roundness |
Vertical-axis spindle effects | American Society for Precision Engineering | 2011 | vertical, axis, spindle, effects |
Anisoelastic sources of error motions | American Society for Precision Engineering | 2011 | anisoelastic, error motion |
The importance of spindle balancing for the machining of freeform optics | American Society for Precision Engineering | 2011 | spindle, balance, freeform, optics |
Retrofitting a Haas GT-20 Lathe with and oil hydrostatic spindle | American Society for Precision Engineering | 2011 | oil hydrostatic, biconic, step compensated, machine retrofitting |
Assembling and testing a tapered roller bearing spindle | American Society for Precision Engineering | 2011 | roller bearing, spindle, tapered |
Multiprobe error separtion to eliminate the influence of ball bearing spindle motion in process measurements | American Society for Precision Engineering | 2011 | multiprobe, error separation, ball bearing, MDRL |
Air system for precision air bearing spindles | American Society for Precision Engineering | 2011 | air system, air bearing |
Turning hardened steel with an oil hydrostatic spindle | European Society for Precision Engineering and Nanotechnology | 2012 | oil hydrostatic, biconic, step compensated, machine retrofitting |
Nanometer-level axis of rotation metrology for a high-precision macromolecular X-ray diffractometer | International Conference on Synchrotron Radiation Instrumentation | 2012 | synchrotron, error, separation, nanometer, metrology, diffractometer |
Simple calibration artifact for use on roundness testers | European Society for Precision Engineering and Nanotechnology | 2012 | calibration, roundness, tester |
Relationship between machine compliance and grinding forces | American Society for Precision Engineering | 2012 | machine, compliance, grinding, forces, MDRL |
Simple calibration artifact for use on roundness testers | American Society for Precision Engineering | 2012 | calibration, roundness, tester |
Experimental apparatus for metrology of partial cylinders | American Society for Precision Engineering | 2012 | metrology, partial, cylinders, MDRL |
Repeatability of a chucking system based on centralizing with a sphere and locating axially on a flange | European Society for Precision Engineering and Nanotechnology | 2012 | spherical, pilot, chuck, chucking system |
Shop air supply for 100 spindles | American Society for Precision Engineering | 2012 | air, supply |
Retrofitting a Parker Liberty One cylindrical grinder with air bearing spindles | American Society for Precision Engineering | 2012 | machine, retrofit, air bearing |
Machining and grinding critical components for the mars rover, Curiosity | American Society for Precision Engineering | 2012 | mars, rover, curiosity, contract, precision, machining |
Spindle for a large liquid mirror telescope | American Society for Precision Engineering | 2012 | large, liquid, mirror, telescope |
Ball bearing analyzer apparatus | American Society for Precision Engineering | 2012 | ball, bearing, analyzer, MDRL |
Synchronous signal removal via wavelet packets | American Society for Precision Engineering | 2013 | synchronous, wavelet, MDRL |
Electrical runout using an eddy-current sensor for roundness measurements | American Society for Precision Engineering | 2013 | eddy, current, roundness |
Manufacturing large ultra-precision parts for the new BIPM Watt balance | American Society for Precision Engineering | 2013 | ultra, precision, BIPM, Watt |
Effect of unbalance on error motion of a high-speed spindle | ASME Manufacturing Science and Engineering Conference | 2013 | ASME, MSEC, unbalance, error motion, high, speed, spindle |
Heat is the price you pay for spindle stiffness | American Society for Precision Engineering | 2013 | heat, stiffness |
Ultraprecise clamping solution for diamond machining comparative characterisation of repeatability | American Society for Precision Engineering | 2013 | clamping, diamond, machining, Nanogrip |
Flow-induced nanovibrations vs. asynchronous error motion | American Society for Precision Engineering | 2013 | AUC, asynchronous, error motion |
Large-aperture ultra-precision air bearing spindle | American Society for Precision Engineering | 2014 | custom, large, aperture, ultra, precision, air, bearing, spindle |
Effects of pressure pulsations on an oil hydrostatic spindle | American Society for Precision Engineering | 2014 | pressure, pulsations, biconic, oil, hydrostatic |
Flow-induced nanovibrations in two types of air bearing spindles | European Society for Precision Engineering and Nanotechnology | 2014 | nanovibrations, air, bearing, spindle |
Precision grinding components of a watt balance using a novel step-compensated conical bydrostatic work spindle | European Society for Precision Engineering and Nanotechnology | 2014 | watt, balance, biconic, hydrostatic, step, compensation, compensated |
Dynamic characterization of an air bearing spindle as a tool to predict asynchronous error | European Society for Precision Engineering and Nanotechnology | 2014 | asynchronous, error, dynamic, AUC, helium |
Pressure vessel effects in an air bearing spindle | American Society for Precision Engineering | 2014 | pressure, vessel, effects, air, bearing, spindle |
Apparent unbalance caused by torque ripple due to encoder eccentricity | European Society for Precision Engineering and Nanotechnology | 2015 | balance, unbalance, encoder, eccentricity |
High resolution flexture-based tip-tilt table | American Society for Precision Engineering | 2015 | tip, tilt, table, flexure, high, resolution |
Measuring central stiffness of an air bearing spindle | European Society for Precision Engineering and Nanotechnology | 2015 | central, stiffness, air, bearing, spindle |
Testing the earliest sub-microinch spindles | American Society for Precision Engineering | 2015 | zeron, sub, microinch, testing, dual, hemisphere |
Evaluation of an Invar shaft for a high speed spindle | European Society for Precision Engineering and Nanotechnology | 2016 | Invar, shaft, high, speed, spindle |
Water-cooled heat load chopper for synchrotron experiments | European Society for Precision Engineering and Nanotechnology | 2016 | water, cooled, heat, load, chopper, synchrotron |
Effects of machine compliance in micro-grinding | European Society for Precision Engineering and Nanotechnology | 2016 | machine, compliance, micro, grinding, MDRL |
Dynamic response characterization of form measuring styli | American Society for Precision Engineering | 2016 | dynamic, response, form, measuring, styli |
Apparatus for testing air bearing pad performance | European Society for Precision Engineering and Nanotechnology | 2016 | air, bearing, pad, performance |
Axial and radial static stiffness testing for an ultra-precision air bearing spindle | American Society for Precision Engineering | 2017 | axial, radial, static, stiffness, ultra, precision, air, bearing, spindle |
Design and testing of an air bearing spindle at low speed for nanometer-level asynchronous error | American Society for Precision Engineering | 2017 | low, speed, nanometer, asynchronous, error |
Multiprobe error separation for rolling element bearing spindles | American Society for Precision Engineering | 2017 | multiprobe, error, separation, rolling, element, bearing, spindles, MDRL |
Precision hard turning on a lathe retrofitted with an oil hydrostatic spindle | American Society for Precision Engineering | 2017 | machine, retrofit, biconic, oil, hydrostatic, hard turning |
Distortion of precision assemblies caused by bolted joints | European Society for Precision Engineering and Nanotechnology | 2017 | distortion, bolt, bolting, precision |
Insufficiency of the SPAM test for spindle error motion measurement | European Society for Precision Engineering and Nanotechnology | 2018 | SPAM, error, motion |
History of the Blockhead spindle | American Society for Precision Engineering | 2018 | history, blockhead, spindle |
Preparing and repairing precision ground surfaces using flatstones | American Society for Precision Engineering | 2018 | flatstones, precision, assembly, machining, preparing |
Using Grejda optimization to determine the best orientation of a spindle | American Society for Precision Engineering | 2018 | Grejda, optimization, orientation, spindle |
Static stiffness and dynamics testing on a spindle for ultra-precision diamond turning | European Society for Precision Engineering and Nanotechnology | 2018 | static, stiffness, dynamics, ultra, precision, diamond, turning |
Compressed air system for ultra precision air bearing spindles | American Society for Precision Engineering | 2018 | compressed, air, system, ultra, precision, bearing, spindles |
Force characterization of micro grinding in zirconia | European Society for Precision Engineering and Nanotechnology | 2018 | force, micro, grinding, zirconia |
Non-contact fluid rotary union design for heat load chopper spindles | European Society for Precision Engineering and Nanotechnology | 2018 | water, cooled, heat, chopper, synchrotron, union |
Using error separation to test ultra high accuracy spindles | American Society for Precision Engineering | 2018 | error, separation, ultra, precision, spindles |
Design and features of the 4 inch Blockhead air bearing spindle | American Society for Precision Engineering | 2019 | blockhead, air bearing |
Error motion testing of an unmotorized 4R Blockhead air bearing spindle | American Society for Precision Engineering | 2019 | blockhead, error motion, motor, motorization |
Motorization of a large aperture air bearing for use in a new X-ray microscope | American Society for Precision Engineering | 2019 | large aperture, motor, motorization |
Temperature control for an ultra-precision high speed spindle | European Society for Precision Engineering and Nanotechnology | 2019 | temperature, heat, ultra, precision, high, speed, spindle |
Grinding a workpiece to sub-micron roundness in a 100 year old grinder | American Society for Precision Engineering | 2019 | machine, retrofit, grinding |
Modeling dynamic stiffness of an air bearing spindle using FRFs | American Society for Precision Engineering | 2019 | modeling, dynamic, stiffness, FRF, FRFs |
Showing 73 items